Inverting remote on-off cable
Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output:
Inverting remote on-off cable Read More »
Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output:
Inverting remote on-off cable Read More »
The EV Charging Station NS has three-phase and single-phase capabilities. It delivers a maximum of 22kW AC in three-phase or 7.3kW in single-phase mode. The device is technically identical to the EV Charging Station, but with a new, modern design available in 3 colours and without the built-in LCD screen. Initial setup, configuration and monitoring
EV Charging Station NS Read More »
Energy Meters are typically used in an Energy Storage System, to measure the power and energy of the whole application at the distribution box. Also they can be used to measure the output of a PV Inverter, to display the data on GX device such as the Cerbo GX and the VRM Portal. There are several models available from Victron, see
Energy Meters VM-3P75CT, ET112, ET340, EM24 Ethernet & EM540 Read More »
The Connect clamps with fuse is an accessory of the Blue Power & Blue Smart IP65 Charger with DC connector. Blue Smart IP65 Chargers This accessory is compatible with the following IP65 chargers: 6V/12V/1.1A, 12V/4A, 12V/5A, 12V/7A, 12V/10A, 12V/15A, 24V/5A, 24V/8A, 24V/13A
Voltage and Temperature sense The battery indicator panel shows the status of the battery. It is an accessory for the Blue Smart IP65 Charger and the Blue Power IP65 Charger. Suitable for 12V lead acid batteries (flooded, GEL, AGM) Blue Smart IP65 Chargers This accessory is compatible with the following IP65 chargers: 6V/12V/1.1A, 12V/4A, 12V/5A,
Battery Indicator Panel Read More »
The Battery Indicator Eyelet M8 is an accessory for the Blue Power IP65 Chargers and the Blue Smart IP65 Chargers. Blue Smart IP65 Chargers This accessory is compatible with the following IP65 chargers: 6V/12V/1.1A, 12V/4A, 12V/5A, 12V/7A, 12V/10A, 12V/15A, 24V/5A, 24V/8A, 24V/13A
Battery Indicator Eyelet M8 Read More »
Single Phase 40A max The AC Current sensor is a simple external current sensor used to measure AC Current, Power (VA) and calculate energy of a PV Inverter connected to the AC input or output of a Multi or Quattro. These values can then be displayed and sent to the VRM-website by the Color Control.
The 2 meter extension cable is an accessory of the Blue Power and Blue Smart IP65 Charger with DC connector. Blue Smart IP65 Chargers This accessory is compatible with the following IP65 chargers: 6V/12V/1.1A, 12V/4A, 12V/5A, 12V/7A, 12V/10A, 12V/15A, 24V/5A, 24V/8A, 24V/13A
2 Meter Extension Cable Read More »
The 12V cigarette lighter plug, with fuse, is an accessory for the Blue Power & Blue Smart IP65 Charger with DC connector. With this plug you can charge your vehicle battery via the cigarette lighter socket. Blue Smart IP65 Chargers This accessory is compatible with the following IP65 chargers: 6V/12V/1.1A, 12V/4A, 12V/5A, 12V/7A, 12V/10A, 12V/15A,
12V Cigarette Lighter Plug Read More »