SolarSense 750 is a self-powered, wireless sensor that gives you direct insight into what your PV installation could produce via the VictronConnect App, VRM or Node-RED. By measuring solar irradiance, estimated PV power, and panel temperature in real-time, SolarSense helps you understand and make better use of available solar energy – optimising your PV installation. […]
The Lithium SuperPack NG is a smart, drop-in replacement for lead-acid batteries, ideal for retrofits or new builds. Available in 12V, 24V, and 48V models, it features monitoring and configuration via the VictronConnect app, a built-in Battery Management System, integrated heating for subzero charging, and an on/off switch for safe off-season storage. Capable of delivering
Lithium SuperPack NG Read More »
Victron BMS overview The VE.Bus BMS V2 is a Battery Management System (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery 12,8V & 25,6V Smart (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication. It monitors and protects the batteries against over voltage and under
Victron BMS NG overview The VE.Bus BMS NG is an all-in-one Battery Management System (BMS) for Victron Lithium NG Batteries (not compatible with Lithium Smart Batteries), designed for systems with Victron inverters or inverter/chargers using VE.Bus communication. It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over
Victron BMS overview The VE.Bus BMS protects each individual cell of a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery.Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature.Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector
Victron BMS overview The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator. The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources
Smart BMS CL 12/100 Read More »
Victron BMS overview The Smart BMS 12/200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator such as in vehicles and boats. It combines a Current Limiter, Battery Combiner and Battery Protector in a robust and compact solution and lets
Victron BMS overview A simple and low cost alternative to the VE.Bus BMS The SmallBMS can replace the VE.Bus BMS in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter/chargers: it has no VE.Bus interface. The smallBMS is intended for use with Victron Smart LiFePo4 batteries with M8 circular
SmallBMS with pre-alarm Read More »
Victron BMS NG overview The SmallBMS NG is an all-in-one Battery Management System (BMS) designed for Victron Lithium NG batteries (not compatible with Lithium Smart batteries). It monitors and protects the batteries by managing charge and load disconnects and providing pre-alarms for low battery voltage. The SmallBMS NG is a straightforward and cost-effective alternative to
