The QuickLink 2-Channel Alarm Expander Kit adds two additional alarm relays to your TBS device. This kit can be used in case the application requires each alarm type to be assigned to a different relay contact. Besides the internal alarm relay that is mostly available in each TBS product, adding an alarm output expander offers […]
QuickLink 2ch Alarm Expander Kit Read More »
The TBSlink communication kit contains a fully isolated TBSlink to USB interface box, a USB interface cable, a 3 meter interface cable (standard cat5 patch cable) and the “Dashboard” Windows software. The complete kit enables you to control, readout and configure a Powersine Combi or an Omnicharge device from your Windows PC. Another possibility is
TBSlink Communication Kit Read More »
This kit enables you to control, readout and configure the Expert Pro from your Windows PC. Another possibility is to use the PC as a datalogger to record all measured parameters for further analysis. The Expert Pro USB Communication Kit contains a fully isolated interface box, an e-xpert pro to interface box connection cable, a USB
USB Communication Kit (for Expert Pro) Read More »
This kit enables you to control, readout and configure the Expert Pro from your Windows PC. Another possibility is to use the PC as a datalogger to record all measured parameters for further analysis. The Expert Pro RS-232 communication kit contains a fully isolated RS-232 interface box, an e-xpert pro to interface box connection cable,
RS-232 Communication Kit Read More »
The Expert pro 1200A/50mV Shunt kit, can be used in applications where the battery current would exceed the maximum ratings of the standard supplied 500A shunt. After installing the 1200A/50mV shunt, the only thing left to do is to set the Expert Pro (-hv) Function settings F6.1 and F6.2 to respectively 1200 Amps and 50
Expert Pro High Current 1200A/50mV Shunt Read More »
DC-DC converters are used to convert from one voltage level to another. In our lineup we are offering models with 12V, 24V or 48V inputs and 12V or 24V outputs at different power levels. There are three different series available: TDC, TDCi and TDCi-CH. Please click the More info button below for a more detailed
DC to DC Converters (12V/24V/48V) Read More »
The DC Modular Remote Battery Switch (RBS) is a smart high current magnetic latching contactor, that can handle continuous DC currents of up to 500Amps. The RBS can easily be installed in an engine room or battery compartment, while being controlled from a more convenient location by a small panel mounted switch. But the RBS
Remote Battery Switch (500A) Read More »
The DC Modular Battery Protect Relay (TBP) has the same capabilities as the Remote Battery Switch (RBS). It is a smart high current magnetic latching contactor, that can handle continuous DC currents of up to 500Amps. Whereas the RBS is mainly used as a locally or externally controlled battery load switch, the TBP has a
Battery Protect Relay (500A) Read More »
The DC Modular high current busbars are used to distribute high DC currents to a number of connected cables, or other DC Modular family members. The solid and compact design, as well as the possibility to link up multiple busbars on a fixed grid, make these products the best choice for all professional DC power systems. Recently
The DC Modular single and dual insulated studs are ideal parts to extend cables, add power taps or form termination end-points. The solid and compact design, as well as the possibility to link these up with other DC Modular family members, make these products the best choice for all professional DC power systems. Please download the
DCM Insulated Studs Read More »
